

- #BLACKMAGIC VIDEOHUB HOW TO#
- #BLACKMAGIC VIDEOHUB FOR MAC OS X#
- #BLACKMAGIC VIDEOHUB INSTALL#
- #BLACKMAGIC VIDEOHUB PORTABLE#
- #BLACKMAGIC VIDEOHUB SOFTWARE#
On all SDI outputs, auto switching between SD, HD, or 6G-SDI video Via front panel LCD or use either RJ45 Ethernet USB 2.0 high speed (480 Mb/s) interface or via EthernetĦ buttons and scroll wheel for control of LCD displayġ x RS-422 input for controlling router crosspoint switching Simultaneous routing of 4K, HD, SD video and DVB-ASI
#BLACKMAGIC VIDEOHUB SOFTWARE#
#BLACKMAGIC VIDEOHUB FOR MAC OS X#
Routing can also be controlled using dedicated remote panels or over Ethernet using the included software for Mac OS X and Windows. A built-in LCD lets view your sources directly on the router itself, with simple push buttons and spin knob provided for control.
#BLACKMAGIC VIDEOHUB PORTABLE#
Housed in a 1RU frame, the Smart Videohub is ideal for use in both large broadcast systems or portable mini racks for live productions.

It supports 4:2:2 and 4:4:4 colour sampling and 10-bit processing for smoother gradations. The CleanSwitch model allows for re-timing of SDI feeds, so all switches are timed to happen between frames.

The router can be put back in factory condition in minutes.The Smart Videohub CleanSwitch 12 x 12 6G-SDI from Blackmagic Design is a mixed format router with 12 6G-SDI inputs and 12 6G-SDI outputs for routing any combination of SD, HD, Ultra HD 4K, and DCI 4K video.
#BLACKMAGIC VIDEOHUB INSTALL#
The Modification is easy to install and is completely reversible. Please indicate if this is for 12x12 or 20x20. Installation NOTE: The modification is completely non-destructive and the resulting modified router runs cooler than the original product.
#BLACKMAGIC VIDEOHUB HOW TO#
The installation demo below will show you how to install both the DC power cable and fan modifications. No soldering is required, installation is as easy as unplugging a cable inside the hub and plugging the new one in. The kit comes with a custom power cable as well as an AC/DC 60W 12V power Supply with modified 4 pin XLR cable end. For sufficient cooling, we strongly recommend that you leave at least 1/2 rack unit space above the Videohub unit. This modification includes an upper panel with pre-installed fans for easy installation, requiring the user to remove the old panel and fans from the Videohub and adding our modified panel by plugging the fans into their corresponding connections and reinstalling the top panel. The fans cool the internal temperatures to the same temperature as the stock fans, but with a reduction in noise. The Quiet On Set Kit was built specifically to allow 12 volt powering of the videohub and to reduce fan noise. Quiet is achieved by adding two 14 dBa (between breathing and whisper level sound level) fans with fluid dynamic bearings to an all-new top panel built by NEBTEK. It also makes the video hub a 12v dc powered device! If you need to work on set near microphones that hear everything we can reduce the sound level of the fan. The Black magic 20x20 and 12x12 Videohubs have fans that are quite normal for rack mounted equipment. Earlier revisions of the BMD videohub did not have a fan of any kind.
